Speed cushions advantages vs. disadvantages

Speed cushions are mainly used to prevent overspeeding. They are extended across a city traffic lane from the centre line. They have longitudinal space between them, allowing long-axel vehicles, such as emergency vehicles, to avoid speed reductions.

Speed cushions can be installed for many traffic management purposes, but the main role of speed cushions is controlling traffic volume and speed in areas where the lives of pedestrians are at stake.

Speed cushions allow water to move without hindrance towards the drainage. They also do not force cyclists, bus and ambulance drivers to change speed to help save lives.

Two red rubber speed cushions are mounted on the road for traffic safety management.

Do speed cushions make the roads safer?

Speed cushions are traffic control equipment installed on city streets and roads to make vehicles travel at a low speed. They are installed in areas where speeding vehicles can increase the rate of fatalities and harm pedestrians.

Speed cushions and other traffic calming measures are taken around roadways, pedestrian zones, crossing signs, construction signs, railroad crossings, parking signs, speed signs, pavement markings, traffic signs, parking lots, traffic signals, and signage.

They make roads safer for drivers and walkers by imposing vehicle speed limits. Because speed cushions have a raised surface, a passenger car passing over them has to reduce its speed by around 20 miles per hour (mph).

Otherwise, it may experience a sudden jerk that can damage the motor vehicle and the vehicular riders.

If there is a sudden increase in traffic volume in an area due to construction or some other reasons, municipalities, committees or transportation departments can install temporary speed cushions until traffic gets back to its initial volume.

Temporary speed cushions are made of recycled rubber and can be installed or removed from an area in less than an hour.

Two Europe red rubber speed cushions are mounted on the road for traffic calming.

Are speed cushions dangerous?

Speed cushions are manufactured according to the standard traffic-engineering techniques by transportation engineers for traffic management. They are less damaging for vehicles than some other speed control devices, such as speed bumps that make vehicles reduce their speed greatly.

Their visibility is enhanced by making their surfaces reflective or by marking the surfaces with paint of bright colours such as yellow or white or reflective tapes.

Another good thing about these road traffic safety tools is that they have gaps between them. These empty spaces prevent the accumulation of rainwater and help in drainage.

In addition to this, emergency vehicles such as an ambulance, fire trucks, and transportation buses can pass through these gaps without diminishing their acceleration. It helps patients who need immediate attention reach hospitals without unwanted delays.

A motorist, cyclist, and bicyclist can also move through spaces between two-speed cushion pads without any discomfort. Speed cushions significantly decrease the chances of collision between cars.

Many Europe-style red road speed cushions made of rubber are on the ground at Sino Concept's factory.

    An arrow that points to the contact form

    You have already read a good part of this article, 👀
    We've
    got the impression that you like it. 🙂

      👇🏻

      If YOU ARE LOOKING FOR A SPEED CUSHION AND SPEED TABLE MANUFACTURER,
      FEEL FREE TO CONTACT US, WE ARE VERY HAPPY TO HELP!

      Let us contact you back!

      Name*

      Email*

      Phone

      Your message*

      Victorien Linkedin will be in charge of your request!

      Do speed cushions damage cars?

      Speed cushions, speed humps, speed bumps, speed tables, rumble strips, traffic cones, and traffic lights control traffic volume at a roundabout, cut-through, school zones, are used in public or residential areas to avoid damaging a car or causing the accident to pedestrians.

      However, they can become damaging when cars rapidly move over them. According to the local ordinance, this is why it is best for the vehicle and the driver to slow down their vehicles.

      If a vehicle passes over it frequently, the inner shoulders of its tires can wear sooner than usual. People should try to reduce their vehicle speed as low as possible so that their vehicle has the least impact.

      Federal highway administration installs speed cushions in areas that really need them. Traffic data proves that traffic control devices help reduce fatalities and death rates due to road accidents.

      They also use stop signs, variable message signs, and speed limit signs to ensure drivers learn about their presence before entering the sight distance.

      Compared to asphalt speed cushions, rubber speed cushions have less impact on a school bus or other vehicles. Rubber is a softer material comparatively; as a result, vehicles also produce less traffic noise when they move over a rubber speed hump or a rubber cushion pad.

      A sign post is installed before a speed cushion to remind drivers of the device

      Advantages of speed cushions

      Speed cushions are a useful traffic speed-limiting tool. They have several pros. Some of them are explained below.

      Reducing vehicular speed

      When speed cushions are strategically installed in road lanes or before crossings, curbs, intersections, unmarked crosswalks, and no-parking areas, they prevent vehicles from exceeding the speed limit. It prevents hazardous incidents from happening.

      A dark green car is driving over two red speed cushions made by Sino Concept.

      Lowering fatalities

      Pedestrian safety is important to ensure people feel easy while moving over pavements, pavement crossings, crosswalks, sidewalks, or while crossing roads and streets. They are vulnerable to over-speeding.

      When drivers move slowly, pedestrians get enough time to cross a road or see the vehicle before it gets too close.

      A black and white asphalt speed cushion near the intersection to reduce vehicles' speed.

      Regulating the route of traffic

      A municipality can install speed cushions on roads with extensive traffic. When in a rush, drivers tend to move through paths that are free of speed-reducing tools.

      So, when speed cushions are installed in high-traffic areas near schools and similar places, traffic and traffic noise can be reduced by directing vehicles to an alternate path.

      Two red rubber speed cushions with white reflective tapes mounted on the road as traffic-calming measures.

      Allowing the emergency vehicle to pass without any hurdle

      One of the benefits of speed cushions is that they do not force emergency vehicles and buses to limit their speed. It means they can move over them at their average speed.

      Emergency vehicles are about to pass speed cushions.

      Making motorists and cyclists travel easily

      Bicyclists and cyclists can move their vehicles between the gaps between speed cushion pads. This way, they can move around the road without any hindrance.

      Two cyclists are passing by the red concrete speed cushions.

      Not affecting drainage

      Speed cushions are not spread over the entire width of the road. There is a particular distance between each cushion pad. Water can pass through these gaps and reach the drainage without any hindrance.

      Disadvantages of speed cushions

      Below are the cons of installing speed cushions.

      • Speed cushions are not as abrupt as speed bumps. They do reduce speed, but not as much as speed bumps do.
      • People tend to change their routes and travel through roads that do not have speed cushions. This can cause high traffic on such roads, further troubling residents.
      • More noise is produced when cars move over them at high speed, which promotes noise pollution. It can be disturbing for people living in the neighbourhood.

      Though speed cushions have many cons, their pros prevail over the cons.

      Black and white speed cushions on the road to reduce vehicles' speed.

      Conclusion

      Speed cushions are installations with wheel cutouts that allow long-axel vehicles such as buses and ambulances to pass them without trouble. However, they do make short-axel vehicles, such as passenger cars, to move at a low speed.

      Speed cushions have both advantages and disadvantages. But their advantages outweigh the disadvantages. People find them on arterial streets and roads.

      If the rate of accidents increases in your area, strategically installing speed cushions might be one of the best solutions for controlling these accidents and fatalities. You should request that your local municipality install speed cushions in your area.

        👇🏻

        If YOU ARE LOOKING FOR A SPEED CUSHION AND SPEED TABLE MANUFACTURER,
        FEEL FREE TO CONTACT US, WE ARE VERY HAPPY TO HELP!

        Let us contact you back!

        Name*

        Email*

        Phone

        Your message*

        Victorien Linkedin will be in charge of your request!

         

        To learn more, we advise you to refer to the following pages:

        SPEED CUSHIONS AND SPEED TABLES

        WHO ARE WE?

        Are you curious about us? Do you wonder what are our know-hows and where do we manufacture our products?

        Discover below our know-how:

        Factory 1 - Rubber

        Best-selling products: Cable protectors, parking stops, speed bumps and cushions.

        Factory 2 - Metal

        Best-selling products: Crowd control barriers, cycle racks, steel bollards, and expanding barriers.

        Factory 3 - Plastic

        Best-selling products: Cable protector covers, traffic cones, roadworks beacons and posts.

        Our Factories

        LOCATIONS

        Sino Concept is a French-owned direct manufacturer with 3 factories in Qingdao, China.

        Sales offices in France, Germany, Finland, and headquarter is in Dubai.

        More about us

        Are you looking for a
        speed cushion and table manufacturer?

          Let us contact you back!

          Name*

          Email*

          Phone

          Your message*

          Victorien Linkedin will be in charge of your request!

          FOLLOW US ON LINKEDIN

          Company

          Our CEO

          CONTACT US

          If you have any questions, you can also email us at
          [email protected]

          Contact